Little-known Wi-Fi trick boosts connection for FREE using old device we all have

YOU don’t need to fork out cash on a snazzy Wi-Fi signal booster when you have an old router laying around.

According to tech experts at Which?, you need to haul your old internet hub out of the discard drawer and put it back into action.

1

In a recent blog post, Tom Morgan, tech support expert at Which? revealed that tweaking a few settings on a retired Wi-Fi hub can help sort out an unreliable internet connection.

“We regularly hear from members who struggle with unreliable Wi-Fi at home,” he wrote.

“But did you know that an old router you have lying around could potentially come to the rescue?

“By plugging in a once-retired router and making tweaks in its settings, you can repurpose the device as a Wi-Fi extender.

“Doing so is a sustainable, money-saving alternative to buying a brand new one.”

Most routers come with a built-in ‘wireless repeater’ or ‘wireless bridging’ mode that lets you configure the router. 

This will not only let the router extend your Wi-Fi signal, but the ethernet LAN ports on the device can also be used to physically connect other devices to your network.

To get started, simply follow these steps:

1. Factory reset your old router.
   • The exact method will vary, but usually this is done by pressing the reset button on the back of the router for 30 seconds.
   • Make a note of the IP addresses of your current router and the old one – these can be found on the back or on a small card from your broadband provider.
2. Connect an ethernet cable to one of the LAN (ethernet) ports on the old router and have the other end plugged into your computer.
3. Open a web browser on your computer and enter the IP address of the old router in the address bar.
   • You will be prompted to enter the router’s username and password.
4. Once logged in, navigate to LAN settings and look for DHCP settings.
5. Disable the DHCP server on the old router.
   • This means that your main router will be handling the assignment of IP addresses.
6. Staying within LAN settings, you’ll see an IP address setting. Here, you can set a static IP address in the same range as your current, in-use router.
   • For example, if your main router’s IP address is 192.168.1.1, you can assign 192.168.1.2 to the old router.
7. Navigate to wireless settings on the old router and find an option for SSID or Wireless network name.
8. Update this, along with the SSID password, to match your current router.
   1. Doing so will allow your devices to connect automatically and switch seamlessly between the two routers.
9. Save the changes you’ve made, then disconnect the ethernet cable from your computer.
10. Connect one end to a LAN port on the old router and the other end to a LAN port on your main router.

After the technical steps are out of the way, you’ll have to place your router where you have a weak signal.

Think of those dark spots in your house where you might find yourself waving your phone around to send a picture or watch a video without buffer.

Morgan recommended using an ethernet cable to connect the old router to the main router.

This will made the connection even more reliable between the two devices.

But if an ethernet cable is impractical (or a visual nightmare) using a powerline adaptor can be a viable alternative.

Best Phone and Gadget tips and hacks

Looking for tips and hacks for your phone? Want to find those secret features within social media apps? We have you covered…

We pay for your stories! Do you have a story for The Sun Online Tech & Science team? Email us at [email protected]