How to install Windows 11: Your complete guide to Windows Update, ISOs, and more

Nick Heyman

3 years ago

Table of contents

Windows 11 is here, and it comes with a lot of questions. Windows upgrades are usually no-nonsense, but Windows 11 has brought along a higher standard for hardware compatibility. This means that actually installing the Windows 11 update, while free like the Windows 10 update, is a little trickier. There is some flexibility to the hardware requirements though, even if you may not have a system that looks eligible on paper. Here is our complete guide on how to install Windows 11 right now.

See also: Everything you need to know about Windows 11

Windows 11 system requirements: Will my PC run Windows 11?

Windows 11 has a stricter set of minimum requirements for eligibility than Windows 10. Microsoft has updated the Windows 11 system requirements a couple of times, and it will likely provide some more flexibility to them. It will not stop you from manually installing Windows 11 on older systems as long as they meet these system requirements, but the bar is set higher for updates via Windows Update.

For now, here are the absolute minimum system requirements needed to install Windows 11:

Windows 11 system requirements
Processor	1 gigahertz (GHz) or faster with 2 or more cores on a compatible 64-bit processor or System on a Chip (SoC)
RAM	4 gigabyte (GB)
Storage	64 GB or larger storage device
System firmware	UEFI, Secure Boot capable
TPM	Trusted Platform Module (TPM) version 2.0
Graphics card	Compatible with DirectX 12 or later with WDDM 2.0 driver
Display	High definition (720p) display that is greater than 9” diagonally, 8 bits per colour channel
Internet connection and Microsoft account	Windows 11 Home edition requires internet connectivity and a Microsoft account
Current Windows version	Windows 10, version 2004 or later

If you want the official upgrade via Windows Update, you’ll still need to have an 8th gen or newer Intel CPU, or a Zen 2 or newer AMD CPU, UEFI secure boot, and TPM 2.0. You will also need at least 4GB of RAM and 64GB of storage. Microsoft has a couple of apps to help with the compatibility and installation in case you’re unable to get the update via Windows Update. More on that in the next section.

Also read: Windows 11 impressions

How to install Windows 11

Windows 11 is now rolling out globally to eligible PCs via Windows Update. If your system meets the minimum requirements listed above, you can go ahead with the update. There is a way to double-check whether your system is eligible for this upgrade, just to be sure.

Additionally, your system needs to have an activated Windows 10 license and run on Windows 10 (version 2004 or higher). You will also need 9GB of free disk space to download the update.

Below is a step-by-step guide on how to install Windows 11:

Palash Volvoikar / Android Authority

Once downloaded, open the installer file, and install the PC Health Checker app.

Palash Volvoikar / Android Authority

Open the PC Health Checker app. It may ask you to sign in to your Microsoft account, in case you’re not. Proceed to check your free upgrade eligibility by clicking on “Check now.”

Palash Volvoikar / Android Authority

The app will show you your system’s eligibility for the free Windows 11 upgrade. You can check the details by clicking on “See all results.”

Palash Volvoikar / Android Authority

If your system is eligible, head over to Windows Update. Open it by heading over to the Settings app, and clicking on “Update & Security.” Remember that this update is a slow rollout, so it will take a while for everyone to get it. If you’re due to get the update already, it should show up when you check for updates.

If the update doesn’t show up, you can bypass the waiting period by downloading Microsoft’s Windows 11 Installation Assistant. Run the app. It will check the system requirements again, and then present you with the license terms.

Palash Volvoikar / Android Authority

The update will begin downloading. Wait for the update to finish downloading, and then installing.

Palash Volvoikar / Android Authority

After the installation bar is full, you will get a prompt to restart your PC to finish the installation. If you ignore the prompt, the assistant will restart your system automatically, 30 minutes after the installation process percentage hits 100, so make sure you pay attention and save your work, or at least click on “Restart later.”

Palash Volvoikar / Android Authority

After the restart, the process will go on like any other new recent Windows OS boot setup. It will take some time to install the update, and your PC will restart a few times. Follow the process, and congrats, you’ve successfully installed Windows 11!

Also read: 5 big changes in Windows 11

How to install Windows 11 on unsupported PCs with an ISO

This process actually has three steps. First, you’ll need to get a Windows 11 ISO, then you need to create a bootable USB drive, and lastly, you’ll need to perform the actual installation. We’ve split up the process to make it easier.

Downloading the official Windows 11 ISO

Head over to the official Windows 11 ISO web page.
Under the “Download Windows 11 Disk Image (ISO),” click on the “Select Download” dropdown menu, and select Windows 11.

Palash Volvoikar / Android Authority

Click on the blue “Download” button underneath. A language selection dropdown menu will pop up.

Palash Volvoikar / Android Authority

Hit “Confirm.” The download link will appear embedded in a blue button that reads “64-bit Download.” Click on it to start the ISO download. Note that this link will be valid for 24 hours from the time of creation.

Palash Volvoikar / Android Authority

Downloading a Windows 11 ISO with TPM bypass

Trusted Platform Module aka TPM is one of the key requirements that Microsoft is enforcing for Windows 11. Older systems may require you to bypass this, and there’s a way to do that with Windows 11 ISOs as of now.

Download AveYo’s Universal MediaCreationTool from Github. It’s a compressed zip file.
Extract the zip file. Run the MediaCreationTool BAT file in the extracted folder by double-clicking on it. Windows will flag it as a potentially suspicious file, but click on “More info” and then “Run anyway.”

Palash Volvoikar / Android Authority

The app will run and give you a pop-up to pick the version you want for the ISO download and creation. Click on “11.”

Palash Volvoikar / Android Authority

Another pop-up will appear. Click on “Create ISO.”

Palash Volvoikar / Android Authority

Give permission to Windows Powershell when requested. The ISO download and creation process will begin. Note that this procedure uses the old Windows 10 media creation tool, so the progress window will say Windows 10 instead of 11. You can ignore that, as the end ISO will be Windows 11, without the TPM checks. Also note that you can click on “Create USB” if you want to skip the hassle of using another app.

Create a bootable Windows 11 USB drive

Now that we have our ISO, we can create the Windows 11 bootable to install the OS. You can do this by using the Windows 11 Media Creation tool. Here are the steps.

Download Rufus. Pick the latest version.
Click on the “SELECT” button next to the “Boot Selection” label. Navigate and select your saved Windows 11 ISO file.
Make sure the “Partition Scheme” label says “GPT,” and the “Target system” label says “UEFI (non CSM)”
Click the “Start” button, and then the “OK” button to confirm. Rufus will finish creating a bootable Windows 11 USB.

You can then use the bootable USB to install the update by opening the setup file from it, or booting off of the drive by using boot options when your computer is starting up, with the drive plugged in.

As this is an unofficial solution, we recommend that you stick to Microsoft’s official methods in order to get the best experience and avoid any issues. If you do choose to follow the other options you do so at your own risk.

That’s how to install Windows 11. Have fun with Microsoft’s new software!

For all the latest Technology News Click Here

For the latest news and updates, follow us on Google News.

Read original article here

Denial of responsibility! TheDailyCheck is an automatic aggregator around the global media. All the content are available free on Internet. We have just arranged it in one platform for educational purpose only. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials on our website, please contact us by email – abuse@thedailycheck.net The content will be deleted within 24 hours.